| |
| |
-
ABDR 1315 - Vehicle Trim and Hardware
A study of vehicle trim and glass service.
Hours (3 sem hrs; 2 lec, 2 lab)
|
| |
-
ABDR 1349 - Automotive Plastic and Sheet Molded Compound Repair
A comprehensive course in repair of non-metal composites.
Hours (3 sem hrs; 2 lec, 2 lab)
|
| |
-
ABDR 1431 - Basic Refinishing
Prerequisites / Corequisite
Prerequisite: ABDR 1455
An introduction to current refinishing products, shop safety and equipment used in the automotive refinishing industry. Emphasis on surface preparation, masking techniques and refinishing of replacement parts.
Hours (4 sem hrs; 2 lec, 6 lab)
|
| |
-
ABDR 1441 - Structural Analysis and Damage Repair I
Training in the roughing and shaping procedures on automotive sheet metal necessary to perform body repairs. Emphasis on the alignment of component parts such as doors, hood, front-end assemblies and deck lids.
Hours (4 sem hrs; 2 lec, 6 lab)
|
| |
-
ABDR 1442 - Structural Analysis and Damage Repair II
Prerequisites / Corequisite
Prerequisite: ABDR 1441
Continuation of general repair and replacement procedures for damaged structural parts and collision damage.
Hours (4 sem hrs; 2 lec, 6 lab)
|
| |
-
ABDR 1455 - Non-Structural Metal Repair
Demonstrate sheet metal repair skills using mechanical and hydraulic equipment. Emphasis on attachment devices used to straighten and align exterior body panels.
Hours (4 sem hrs; 2 lec, 6 lab)
|
| |
-
ABDR 2402 - Autobody Mechanical and Electrical Service
A course in the repair, replacement and/or service of collision damaged mechanical or electrical systems. Topics include drive train removal, reinstallation and service; cooling system service and repair; exhaust system service; and emission control systems. Additional topics include wire and connector repair, reading wiring diagrams and troubleshooting.
Hours (4 sem hrs; 2 lec, 4 lab)
|
| |
-
ABDR 2441 - Major Collision Repair and Panel Replacement
Instruction in preparation of vehicles for major repair processes. Covers interpreting information from damage reports, planning repair sequences, selecting appropriate tools and organizing removed parts for reinstallation.
Hours (4 sem hrs; 2 lec, 4 lab)
|
| |
-
ABDR 2449 - Advanced Refinish I
Application of multi-stage refinishing techniques. Advanced skill development solving refinishing problems. Application of multi-stage refinishing techniques with emphasis on formula mixing and special spraying techniques.
Hours (4 sem hrs; 2 lec, 6 lab)
|
| |
-
ACCT 2301 - Accounting Principles I
Prerequisites / Corequisite
Prerequisite: MATH 0303-minimum grade of C, RDNG 0331-minimum grade of C or a score on a state-approved test indicating college-level reading and math skills
This course is an introduction to the fundamental concepts of financial accounting as prescribed by U.S. generally accepted accounting principles (GAAP) as applied to transactions and events that affect business organizations. Students will examine the procedures and systems to accumulate, analyze, measure and record financial transactions. Students will use recorded financial information to prepare a balance sheet, income statement, statement of cash flows and statement of shareholders’ equity to communicate the business entity’s results of operations and financial position to users of financial information who are external to the company. Students will study the nature of assets, liabilities and owners’ equity while learning to use reported financial information for purposes of making decisions about the company. Students will be exposed to International Financial Reporting Standards (IFRS).
Hours (3 sem hrs; 3 lec)
Texas Common Course Number: ACCT 2301
|
| |
-
ACCT 2302 - Accounting Principles II
Prerequisites / Corequisite
Prerequisite: ACCT 2301
This course is an introduction to the fundamental concepts of managerial accounting appropriate for all organizations. Students will study information from the entity’s accounting system relevant to decisions made by internal managers, as distinguished from information relevant to users who are external to the company. The emphasis is on the identification and assignment of product costs, operational budgeting and planning, cost control and management decision making. Topics include product costing methodologies, cost behavior, operational and capital budgeting, and performance evaluation.
Hours (3 sem hrs; 3 lec)
Texas Common Course Number: ACCT 2302
|
| |
-
ACNT 1303 - Introduction to Accounting I
A study of analyzing, classifying and recording business transactions in a manual and computerized environment. Emphasis on understanding the complete accounting cycle and preparing financial statements, bank reconciliations and payroll.
Hours (3 sem hrs; 3 lec, 1 lab)
|
| |
-
AEMA 0001 - Basic Math
Prerequisites / Corequisite
Prerequisite: TSI Math score less than 336 or an equivalent score on a state-approved test
Integers; signed numbers; absolute value; opposites; operations on fractions; operations on decimals; ordering; ratios; proportions; percents; exponents; base and powers; order of operations; geometry; evaluating expressions; introduction to algebra; statistical measurements; conversions.
Hours (0 sem hr)
Notes
This is an NCBO (non-course based option) and does not meet elective or graduation requirements.
|
| |
-
AERM 1205 - Weight and Balance
An introduction to Federal Aviation Administration (FAA) required subjects relating to the weighing of aircraft, the performance of weight and balance calculations, and appropriate maintenance record entries.
Hours (2 sem hrs; 1 lec, 2 lab)
|
| |
-
AERM 1208 - Federal Aviation Regulations
A course in the use and understanding of the Federal Aviation Administration (FAA) and aircraft manufacturers’ publications, forms and records; and the exercise of mechanic privileges within prescribed limitations.
Hours (2 sem hrs; 2 lec, 1 lab)
|
| |
-
AERM 1210 - Ground Operations
An introductory course in fuels, servicing methods, safety procedures, aircraft movement, securing and operations of aircraft, external power equipment, aircraft cleaning and corrosion control.
Hours (2 sem hr; 2 lec, 1 lab)
|
| |
-
AERM 1240 - Aircraft Propellers
Fundamentals of propeller design, function and construction. Skill development in inspection, servicing and repair of fixed-pitch, constant-speed and feathering propellers and governing systems. Instruction in removal, balancing, installation of propellers, and fundamental safety procedures are also addressed.
Hours (2 sem hrs; 1 lec, 2 lab)
|
| |
-
AERM 1241 - Wood, Fabric and Finishes
A course in the use and care of various covering materials, finishes and wood structures including approved methods and procedures. Safety also addressed.
Hours (2 sem hrs; 1 lec, 2 lab)
|
| |
-
AERM 1243 - Instruments and Navigation/Communication
A study of aircraft instruments and electronic flight instrument systems including testing and installing instruments; inspecting, checking and troubleshooting navigation and communication systems; and inspecting and repairing antennas and electronic equipment installations.
Hours (2 sem hrs; 1 lec, 2 lab)
|
| |
-
AERM 1247 - Airframe Auxiliary Systems
A comprehensive study of airframe auxiliary systems including cabin atmospheric control systems, ice and rain control systems for aircraft and engines, and fire detection and protection systems. Fundamentals of safety procedures also addressed.
Hours (2 sem hrs; 1 lec, 4 lab)
|
| |
-
AERM 1253 - Aircraft Welding
Skill development in repair procedures for steel, magnesium, brass and aluminum materials. Includes the selection and application of appropriate methods of welding, brazing and soldering. Fundamentals of safety procedures also addressed.
Hours (2 sem hrs; 1 lec, 2 lab)
|
| |
-
AERM 1303 - Shop Practices
An introduction to shop safety, the correct use of hand tools, equipment, and precision measurement, identification of aircraft hardware, and the fabrication of fluid lines and tubing. Emphasis on procedures for testing, heat treating and inspection of aircraft structures.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
AERM 1314 - Basic Electricity
A study of aircraft electrical systems and their requirements including the use of ammeter, voltmeter and ohmmeter; series and parallel circuits; inductance and capacitance; magnetism; converting alternating current (AC) to direct current (DC); controlling devices; maintenance and servicing of aircraft batteries; and reading and interpreting aircraft electrical diagrams to include solid state devices and logic functions. Fundamentals of safety also addressed.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
AERM 1315 - Aviation Science
Fundamentals of mathematics, physics and drawings as they apply to aircraft principles and operations as required by the Federal Aviation Administration for airframe and powerplant mechanics.
Hours (3 sem hrs; 2 lec, 3 lab)
|
| |
-
AERM 1344 - Aircraft Reciprocating Engines
Reciprocating engines, their development, operating principles and theory. Includes engine instruments, lubrication and exhaust systems. Also addresses fundamentals of safety.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
AERM 1345 - Airframe Electrical Systems
A study of airframe electrical systems including installation, removal, disassembly and repair of electrical components and related wiring. Fundamentals of electrical safety also addressed.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
AERM 1349 - Hydraulic, Pneumatic and Fuel Systems
Skill development in inspecting, servicing and maintaining aircraft fluid systems including hydraulics, pneumatics and fuel. Application of concepts through detailed maintenance procedures. Fundamentals of safety procedures also addressed.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
AERM 1350 - Landing Gear Systems
Inspection, servicing, overhaul and repair of fixed and retractable landing gear systems. In-depth coverage of systems, components and operation.
Hours (3 sem hrs; 2 lec, 2 lab)
|
| |
-
AERM 1351 - Aircraft Turbine Engine Theory
General principles of theory, history and servicing of turbine engines to include lubrication, instrumentation, auxiliary power units and exhaust systems. Fundamentals of safety procedures are also addressed.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
AERM 1352 - Aircraft Sheet Metal
Skill development in inspection and repair of sheet metal structures including forming, lay out, and bending of sheet metal and identification, selection, and installation of rivets and fasteners. Fundamentals of safety procedures also addressed.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
AERM 1354 - Aircraft Composites
Comprehensive concepts of the inspection and repair of composite, fabric, core and laminated structural materials including doors, windows, bonded structures and interior furnishings. Safety procedures to include the handling and storage of composite materials will also be addressed.
Hours (3 sem hrs; 2 lec, 2 lab)
|
| |
-
AERM 1356 - Aircraft Powerplant Electrical
General principles of theory, operation and maintenance of powerplant electrical systems including ignition, starting and fire protection systems. Fundamentals of safety procedures will also be addressed.
Hours (3 sem hrs; 1 lec, 6 lab)
|
| |
-
AERM 1391 - Special Topics in Fasteners
The inspection and repair of metal and composite structures including forming, layout of metal and selection, installation and removal of special fasteners. Fabrication and installation of peelable, brass, phenolic and fiberglass shims will be covered.
Hours (3 sem hrs; 2 lec, 2 lab)
|
| |
-
AERM 2231 - Airframe Inspection
In-depth coverage of methods and procedures to perform airframe conformity and air worthiness inspections (including One Hundred Hour Inspections) in accordance with Federal Aviation Regulations and manufacturer’s service information. Safety procedures will also be addressed.
Hours (2 sem hrs; 1 lec, 2 lab)
|
| |
-
AERM 2233 - Assembly and Rigging
A comprehensive study of the assembly and rigging of fixed and rotary-wing aircraft including structural alignment, balancing and rigging of control systems, and assembly of aircraft components. Fundamentals of safety procedures are also addressed.
Hours (2 sem hrs; 1 lec, 4 lab)
|
| |
-
AERM 2341 - Powerplant and Auxiliary Power Units
Advanced concepts of auxiliary power unit (APU) and powerplant systems and components. Safety procedures will also be addressed.
Hours (3 sem hrs; 2 lec, 2 lab)
|
| |
-
AERM 2351 - Aircraft Turbine Engine Overhaul
Comprehensive study in inspection, disassembly, reassembly and replacement of gas turbine engines, sections and components including operational troubleshooting, analysis and safety.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
AERM 2352 - Aircraft Powerplant Inspection
In depth coverage of methods and procedures to perform powerplant conformity and airworthiness inspections (including one hundred hour inspections) in accordance with Federal Aviation Regulations and manufacturer’s information. Safety procedures will also be addressed.
Hours (3 sem hrs; 1 lec, 6 lab)
|
| |
-
AERM 2447 - Aircraft Reciprocating Engine Overhaul
A comprehensive study of reciprocating engine overhaul including measurement and inspection procedures. Instruction in removal and installation, inspections, checks, servicing, repair of engines and safety procedures will also be addressed.
Hours (4 sem hrs; 2 lec, 6 lab)
|
| |
-
AEWR 0001 - Basic Writing
Prerequisites / Corequisite
Prerequisite: A minimum TSI score of 310-350
Basic skills course that develops and reinforces writing skills with special emphasis on writing to meet TSI requirements.
Hours (3 sch; 2 lec, 2 lab)
Notes
This is a NCBO (non-course based option) and does not meet elective or graduation requirements.
|
| |
-
ANTH 2302 - Introduction to Archeology
Prerequisites / Corequisite
Prerequisite: RDNG 0331-minimum grade of C or a score on a state-approved test indicating college-level reading skills
The study of the human past through material remains. The course includes a discussion of methods and theories relevant to archeological inquiry. Topics may include the adoption of agriculture, response to environmental change, the emergence of complex societies and ethics in the discipline.
Hours (3 sem hrs; 3 lec)
Texas Common Course Number: ANTH 2302
|
| |
-
ANTH 2346 - General Anthropology and the Humanities
Prerequisites / Corequisite
Prerequisite: RDNG 0331-minimum grade of C or a score on a state-approved test indicating college-level reading skills
The study of human beings, their antecedents, related primates, and their cultural behavior and institutions. Introduces the major subfields: physical and cultural anthropology, archeology, linguistics, their applications and ethics in the discipline.
Hours (3 sem hrs; 3 lec)
Texas Common Course Number: ANTH 2346
|
| |
-
ANTH 2351 - Cultural Anthropology
Prerequisites / Corequisite
Prerequisite: RDNG 0331-minimum grade of C or a score on a state-approved test indicating college-level reading skills
The study of human cultures. Topics may include social organization, institutions, diversity, interactions between human groups, and ethics in the discipline.
Hours (3 sem hrs; 3 lec)
Texas Common Course Number: ANTH 2351
|
| |
-
ARCH 2201 - Design Communication I
The development of visual perception and graphic communication utilizing an intensive investigation of freehand drawing
Hours (2 sem hrs; 1 lec, 3 lab)
Texas Common Course Number: ARCH 2201
|
| |
-
ARTC 1166 - Graphic Design Practicum
Practical, general workplace training supported by an individualized learning plan developed by the employer, college and student.
Hours (1 hr credit/10 hrs of work/wk)
|
| |
-
ARTC 1266 - Graphic Design Practicum
Practical, general workplace training supported by an individualized learning plan developed by the employer, college and student.
Hours (2 hrs credit/20 hrs of work/wk)
|
| |
-
ARTC 1302 - Digital Imaging I
Prerequisites / Corequisite
Prerequisite: ARTC 1325
General principles of digital image processing and electronic painting. Emphasis on bitmapped or raster-based image marking and the creative aspects of electronic illustration for commercial and fine art applications.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
ARTC 1313 - Digital Publishing I
Prerequisites / Corequisite
Prerequisites: ARTC 1325 and ARTC 1327
The fundamentals of using digital layout as a primary publishing tool and the basic concepts and terminology associated with typography and page layout.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
ARTC 1325 - Introduction to Computer Graphics
A survey of design concepts, terminology, processes and procedures. Topics include computer graphics hardware, digital images, digital publishing, vectorbased graphics and interactive multimedia.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
ARTC 1327 - Typography
Prerequisites / Corequisite
Prerequisite: ARTC 1325
A study of letterforms and typographic concepts as elements of graphic communication. Emphasis on developing a current, practical typographic knowledge based on industry standards.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
ARTC 1349 - Art Direction I
Prerequisites / Corequisite
Prerequisite: ARTC 1313
Creation of projects in art direction for advertising graphic campaigns for products, services or ideas. Topic include all campaign procedures from initial research and creative strategy to final execution and presentation of a comprehensive project.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
ARTC 1353 - Computer Illustration
Prerequisites / Corequisite
Corequisite: ARTC 1325
Implementation of software for illustration and/or photo manipulation for reproduction.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
ARTC 1391 - Special Topics in Graphic Design, Commercial Art and Illustration
Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student.
Hours (3 sem hrs; 6 studio hrs)
|
| |
|
| |
-
ARTC 2311 - History of Communication Graphics
Survey of the evolution of graphic arts as it relates to the history of art. Topics include formal, stylistic, social, political, economic and historical aspects. Emphasis on the movement, schools of thought, individuals and technology as they interrelate with graphic arts.
Hours (3 sem hrs; 3 lec, 1 lab)
|
| |
-
ARTC 2313 - Digital Publishing II
Prerequisites / Corequisite
Prerequisite: ARTC 1313
Layout procedures from thumbnails and roughs to final comprehensive and printing; emphasis on design principles for the creation of advertising and publishing materials, and techniques for efficient planning and documenting projects.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
ARTC 2317 - Typographic Design
Prerequisites / Corequisite
Prerequisite: ARTC 1327
Exploration of problems in typographic design including computer generated letterforms as elements of design. Topics include theory and techniques of traditional, contemporary and experimental typography for advertising and editorial usage.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
ARTC 2335 - Portfolio Development for Graphic Design
Prerequisites / Corequisite
Prerequisite: Successful completion of 21 hrs of ARTC coursework or instructor consent
Preparation of a portfolio comprised of completed graphic design class projects. Evaluation and demonstration of portfolio presentation methods based on the student’s specific area of study.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
ARTS 1301 - Art Appreciation
A general introduction to the visual arts designed to create an appreciation of the vocabulary, media, techniques and purposes of the creative process. Students will critically interpret and evaluate works of art within formal, cultural and historical contexts.
Hours (3 sem hrs; 3 lec)
Texas Common Course Number: ARTS 1301
|
| |
-
ARTS 1303 - Art History I
A chronological analysis of the historical and cultural contexts of the visual arts from prehistoric times to the 14th century.
Hours (3 sem hrs; 3 lec)
Texas Common Course Number: ARTS 1303
|
| |
-
ARTS 1304 - Art History II
A chronological analysis of the historical and cultural contexts of the visual arts from the 14th century to the present day.
Hours (3 sem hrs; 3 lec)
Texas Common Course Number: ARTS 1304
|
| |
-
ARTS 1311 - Design I
An introduction to the fundamental terminology, concepts, theory and application of two-dimensional design.
Hours (3 sem hrs; 2 lec, 4 lab)
Texas Common Course Number: ARTS 1311
|
| |
-
ARTS 1312 - Design II
Prerequisites / Corequisite
Prerequisite: ARTS 1311
An introduction to the fundamental terminology, concepts, theory and application of three-dimensional design.
Hours (3 sem hrs; 2 lec, 4 lab)
Texas Common Course Number: ARTS 1312
|
| |
-
ARTS 1316 - Drawing I
A foundation studio course exploring drawing with emphasis on descriptive, expressive and conceptual approaches. Students will learn to see and interpret a variety of subjects while using diverse materials and techniques. Course work will facilitate a dialogue in which students will engage in critical analysis and begin to develop their understanding of drawing as a discipline.
Hours (3 sem hrs; 2 lec, 4 lab)
Texas Common Course Number: ARTS 1316
|
| |
-
ARTS 1317 - Drawing II
Prerequisites / Corequisite
Prerequisite: ARTS 1316
A studio course exploring drawing with continued emphasis on descriptive, expressive and conceptual approaches. Students will further develop the ability to see and interpret a variety of subjects while using diverse materials and techniques. Course work will facilitate a dialogue in which students will employ critical analysis to broaden their understanding of drawing as a discipline.
Hours (3 sem hrs; 2 lec, 4 lab)
Texas Common Course Number: ARTS 1317
|
| |
-
ARTS 2289 - Academic Cooperative in Art
Prerequisites / Corequisite
Prerequisites: ENGL 1301, ARTS 1303 and ARTS 1304
One Art History course (ARTS 1303 or ARTS 1304) may be taken concurrently
An instructional program designed to integrate on-campus study with practical hands-on work experience. In conjunction with class seminars, the individual student will set specific goals and objectives in the study of studio art and/or art history.
Hours (2 sem hrs; 1 lec, 10 hours of work/week)
Texas Common Course Number: ARTS 2289
|
| |
-
ARTS 2316 - Painting I
Prerequisites / Corequisite
Prerequisites: ARTS 1311 and ARTS 1317
Exploration of ideas using painting media and techniques.
Hours (3 sem hrs; 2 lec, 4 lab)
Texas Common Course Number: ARTS 2316
|
| |
-
ARTS 2323 - Life Drawing I
Prerequisites / Corequisite
Prerequisite: ARTS 1317
Basic study of the human form.
Hours (3 sem hrs; 2 lec, 4 lab)
Texas Common Course Number: ARTS 2323
|
| |
-
ARTS 2346 - Ceramics I
Exploration of ideas using basic ceramic processes.
Hours (3 sem hrs; 2 lec, 4 lab)
Texas Common Course Number: ARTS 2346
|
| |
-
ARTS 2356 - Photography I (fine arts emphasis)
Introduction to the basics of photography. Includes camera operation, techniques, knowledge of chemistry and presentation skills. Emphasis on design, history and contemporary trends as a means of developing an understanding of photographic esthetics.
Hours (3 sem hrs; 2 lec, 4 lab)
Notes
Students completing ARTS 2356 cannot earn credit for COMM 1318.
Texas Common Course Number: ARTS 2356
|
| |
-
ARTS 2357 - Photography II (fine arts emphasis)
Prerequisites / Corequisite
Prerequisite: ARTS 2356
Extends the student’s knowledge of technique and guides them in developing personal outlooks toward specific applications of the photographic process.
Hours (3 sem hrs; 2 lec, 4 lab)
Texas Common Course Number: ARTS 2357
|
| |
-
ARTV 1211 - Storyboard
Introduction to the techniques of storyboarding including organizing a projects content and arranging it in a visual format.
Hours (2 sem hrs; 3 studio)
|
| |
-
ARTV 1303 - Basic Animation
Prerequisites / Corequisite
Corequisites: ARTC 1325
Examination of concepts, characters and story boards for basic animation production. Emphasis on creating movement and expression utilizing traditional or electronically generated image sequences.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
ARTV 1341 - 3-D Animation I
Prerequisites / Corequisite
Prerequisite: ARTV 1303 and ARTC 1325
Three-dimensional (3-D) modeling and rendering techniques including lighting, staging, camera and special effects. Emphasizes 3-D modeling building blocks using primitives to create simple and complex objects.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
ARTV 1345 - 3-D Modeling and Rendering
Prerequisites / Corequisite
Prerequisite: ARTV 1303
Technique of three-dimensional (3-D) modeling utilizing appropriate software. Includes the creation and modification of 3-D geometric shapes, use of a variety of rendering techniques, camera light sources, texture and surface mapping.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
ARTV 1351 - Digital Video
Prerequisites / Corequisite
Prerequisite: COMM 1337 or instructor consent
Producing and editing video and sound for multimedia or web productions. Emphasizes capture, editing and outputting of video using a desktop digital video workstation.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
|
| |
-
ARTV 2341 - Advanced Digital Video
Prerequisites / Corequisite
Prerequisite: ARTV1351 or instructor consent
Instruction in the use of advanced digital video techniques for post-production. Emphasis on generation and integration of special effects, 2-D animation and 3-D animation for film, video, CD-ROM and the internet. Exploration of new and emerging compression and video streaming technologies.
Hours (3 sem hrs; 1 lec, 5 lab)
|
| |
-
ARTV 2351 - 3-D Animation II
Prerequisites / Corequisite
Prerequisite: ARTC 1341
Skill development in three-dimensional modeling and rendering techniques using lighting, staging and special effects for digital output. Emphasis on the production of three-dimensional (3-D) animation as final digital outputting using modeling, rendering and animation software.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
AUMT 1305 - Introduction to Automotive Technology
An introduction to the automotive industry including automotive history, safety practices, shop equipment and tools, vehicle subsystems, service publications, professional responsibilities and basic automotive maintenance. May be taught manufacturer specific.
Hours (3 sem hrs; 2 lec, 2 lab)
|
| |
-
AUMT 1310 - Automotive Brake Systems
Prerequisites / Corequisite
Prerequisite: AUMT 1305
Operation and repair of drum/disc type brake systems. Topics include brake theory, diagnosis and repair of power, manual, anti-lock brake systems and parking brakes. May be taught manufacturer specific.
Hours (3 sem hrs; 2 lec, 3 lab)
|
| |
-
AUMT 1316 - Automotive Suspension and Steering Systems
Prerequisites / Corequisite
Prerequisite: AUMT 1305
Diagnosis and repair of automotive suspension and steering systems including electronically controlled systems. Includes component repair, alignment procedures and tire and wheel service. May be taught manufacturer specific.
Hours (3 sem hrs; 2 lec, 3 lab)
|
| |
-
AUMT 1319 - Automotive Engine Repair
Prerequisites / Corequisite
Prerequisite: MCHN 1343
Fundamentals of engine operation, diagnosis and repair. Emphasis on identification, inspection, measurements, disassembly, repair and reassembly of the engine. May be taught manufacturer specific.
Hours (3 sem hrs; 2 lec, 3 lab)
|
| |
-
AUMT 1345 - Automotive Climate Control Systems
Prerequisites / Corequisite
Prerequisites: AUMT 1305
Diagnosis and repair of manual/electronic climate control systems; includes the refrigeration cycle and EPA guidelines for refrigerant handling. May be taught manufacturer specific.
Hours (3 sem hrs; 2 lec, 3 lab)
|
| |
-
AUMT 1380 - Cooperative Education - Automobile/Automotive Mechanics Technology/Technician
Career-related activities encountered in the student’s area of specialization offered through an individualized agreement among the college, employer and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component.
Hours (3 sem hrs; 1 lec, 20 ext hrs)
Notes
This course may be repeated if topics and learning outcomes vary.
|
| |
-
AUMT 2313 - Automotive Drive Train and Axles
Prerequisites / Corequisite
Prerequisite: AUMT 1305
A study of automotive clutches, clutch operation devices, manual transmissions/ transaxles and differentials with emphasis on diagnosis and repair. May be taught manufacturer specific.
Hours (3 sem hrs; 2 lec, 3 lab)
|
| |
-
AUMT 2317 - Automotive Engine Performance Analysis I
Prerequisites / Corequisite
Prerequisite: AUMT 1305
Theory, operation, diagnosis of drivability concerns, and repair of ignition and fuel delivery systems. Use of current engine performance diagnostic equipment. May be taught manufacturer specific.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
AUMT 2325 - Automotive Automatic Transmission and Transaxle
Prerequisites / Corequisite
Prerequisite: AUMT 1305
A study of the operation, hydraulic circuits and electronic controls of modern automatic transmissions/transaxles. Diagnosis, disassembly and assembly procedures with emphasis on the use of special tools and repair techniques. May be taught manufacturer specific.
Hours (3 sem hrs; 2 lec, 3 lab)
|
| |
-
AUMT 2328 - Automotive Service
Prerequisites / Corequisite
Prerequisite: AUMT 1305
Mastery of automotive service including competencies covered in related courses. May be taught manufacturer specific.
Hours (3 sem hrs; 2 lec, 3 lab)
|
| |
-
AUMT 2334 - Automotive Engine Performance Analysis II
Prerequisites / Corequisite
Prerequisite: AUMT 1305
Diagnosis and repair of emission systems, computerized engine performance systems and advanced ignition and fuel systems. Includes use of advanced engine performance diagnostic equipment. May be taught manufacturer specific.
Hours (3 sem hrs; 2 lec, 4 lab)
|
| |
-
AUMT 2337 - Automotive Electronics
Prerequisites / Corequisite
Prerequisites: AUMT 1305 and ELPT 1311
Study of electronic principles applied to microcomputers and communication systems. Includes digital fundamentals and use of electronic test equipment. May be taught manufacturer specific.
Hours (3 sem hrs; 2 lec, 3 lab)
|
| |
-
BAS 0303 - Basic Academic Skills
Basic skills course that develops and reinforces reading, math and writing.
Hours (3 sem hrs; 2 lec, 2 lab)
Notes
This course does not satisfy TSI requirements.
|
| |
-
BASR 0301 - Basic Academic Skills
Prerequisites / Corequisite
Prerequisite: A minimum TSI score of 340-341
Basic skills course that develops and reinforces reading skills with special emphasis on reading to meet TSI requirements.
Hours (3 sem hrs; 2 lec, 2 lab)
|
| |
-
BASR 0302 - Basic Academic Skills
Prerequisites / Corequisite
Prerequisite: BASR 0301 or RDNG 0301 or minimum TSI score 342
Basic skills course that develops and reinforces reading skills to meet TSI requirements.
Hours (3 sem hrs; 2 lec, 2 lab)
|
| |
-
BCIS 1305 - Business Computer Applications
Prerequisites / Corequisite
Prerequisite: RDNG 0321-minimum grade of C or a score on a state-approved test indicating readiness for RDNG 0331
Students will study computer terminology, hardware and software related to the business environment. The focus of this course is on business productivity software applications and professional behavior in computing, including word processing (as needed), spreadsheets, databases, presentation graphics and business-oriented utilization of the Internet.
Hours (3 sem hrs; 2 lec, 3 lab)
Texas Common Course Number: BCIS 1305
|
| |
-
BIOL 1108 - Biology for Non-Science Majors Laboratory I
This laboratory-based course accompanies BIOL 1308, Biology for Non-Science Majors I. Laboratory activities will reinforce a survey of biological principles with an emphasis on humans, including chemistry of life, cells, structure, function and reproduction.
Hours (1 sem hr; 2 lab)
Texas Common Course Number: BIOL 1108
|
| |
-
BIOL 1109 - Biology for Non-Science Majors Laboratory II
This laboratory-based course accompanies BIOL 1309, Biology for Non-Science Majors II. Laboratory activities will reinforce a survey of biological principles with an emphasis on humans, including evolution, ecology, plant and animal diversity and physiology.
Hours (1 sem hr; 2 lab)
Texas Common Course Number: BIOL 1109
|
| |
-
BIOL 1308 - Biology for Non-Science Majors I
Provides a survey of biological principles with an emphasis on humans, including chemistry of life, cells, structure, function and reproduction.
Hours (3 sem hrs; 3 lec)
Texas Common Course Number: BIOL 1308
|
| |
-
BIOL 1309 - Biology for Non-Science Majors II
This course will provide a survey of biological principles with an emphasis on humans, including evolution, ecology, plant and animal diversity and physiology.
Hours (3 sem hrs; 3 lec)
Texas Common Course Number: BIOL 1309
|
| |
-
BIOL 1406 - Biology for Science Majors I
Prerequisites / Corequisite
Prerequisite: RDNG 0331-minimum grade of C or a score on a state-approved test indicating college-level reading skills; SCIT 1307 recommended
Fundamental principles of living organisms will be studied, including physical and chemical properties of life, organization, function, evolutionary adaptation and classification. Concepts of cytology, reproduction, genetics and scientific reasoning are included. Laboratory activities will reinforce lecture content.
Hours (4 hrs; 3 lec, 3 lab)
Texas Common Course Number: BIOL 1406
|
| |
Page: 1
| 2
| 3
| 4
| 5
| 6
| 7
| 8
| 9
| 10
| 11
… Forward 10 -> 15 |
Print this Page